Features:
The isolated serial option board (I) provides an RS232C, RS485 or an RS422 serial interface. The port is software configurable for any of these modes.
RS485 requires a 120-Ohm terminating resistor at each end of the transmission line and RS422 requires a 100-Ohm terminating resistor at the receiver end of the transmission line only.
- Isolated Serial Port option board
- Software configurable for RS232, RS485, RS422
- Fits CP-10, CP-11, CP-21, CP-30, MC-10, MC-11, LP-1
COMMS-OPTION-I (ISOLATED RS232/422/485 for CP-11/CP-21/MC-11, option port 2/3) |
Product specifications: |
|
General
|
| |
|
| Baudrate |
300 - 115200 bp/s |
| Configuration Software |
Toolbox |
| Internal Power Consumption |
15mA from +5VDC Bus on backplane |
| RS422 Line drive |
10 Receivers |
| RS485 Line drive |
32 Receivers |
| Communications |
No parity bit, 8 data bits, 1 stop bit |
| Isolation |
2.5 kV |
| |
|
|
Environmental
|
| |
|
| Operating Temperature |
-20°C to 70°C / -4°F to 158°F |
| Storage Temperature |
-40°C to 85°C / -40°F to 185°F |
| Operating Humidity |
5 to 98% RH non-condensing |
